15192788777 
24-hour hotline for enterprises
24-hour hotline
Click search
Information dynamics NEWS
News navigation
Contact us
Address: No.1, Haixi Road, Beiguan Industrial Park, Jiaozhou City, Shandong Province
(Add: No.1，Haixi Road, Beiguan Industrial Park, Jiaozhou Shandong China.）
H.P：15192788777
Website：Http://www.hbhmxcl.com ;
E-mail：haixisj2007@163.com
-
What happened to the material leakage during the installation and test of the insulation pipe equipm
One of the reasons for the leakage of the insulation pipe equipment during the installation and commissioning process is that after the head is heated, before the material is not fed in, the head bolt must be tightened again. After the head is heated, the head will expand and there will be a small gap between the head parts. Gap causes material leakage. The second reason is that after feeding, if 【More】
-
Product introduction of one-step production line
One-step polyurethane insulating pipe production line Product introduction: The line is the insulation layer and anti-corrosion layer coated on the external surface of the pipe at the same time, so as to form a thermal insulation pipe anti-corrosion layer, a domestic initiative. Compared with other methods, with continuous operation, high production efficiency, low cost, energy saving, no 【More】
-
Spray room introduction
Spray room: after 3PE coating, the steel pipe enters the cooling room for cooling and finalization. The cooling room is equipped with lifting spray device, which can be adjusted according to the size of 3PE pipe diameter, and the cooling and finalization can be realized by controlling the flow of 3PE products with different pipe diameters. The driving part of the cooling room is equipped with wate【More】
-
Introduction of rubber coated + PE winding extruder
Gluing + PE winding extruder: adhesive winding: due to the poor adhesion between polyethylene layer and fusion bonded epoxy coating, the adhesive is used to improve the adhesion between fusion bonded epoxy coating and polyethylene layer, and the application of adhesive must be carried out in the process of epoxy powder gluing.【More】
-
Introduction of dusting room manufacturers
Powder spraying chamber: the workpiece enters the spray gun position of the powder spraying chamber through the conveying chain to prepare for spraying. The electrostatic generator releases high-voltage static electricity (negative pole) to the space in the direction of the workpiece through the electrode needle at the gun mouth. The high-voltage static electricity ionizes the mixture of powder an【More】
-
Introduction of intermediate frequency heating equipment
Medium frequency heater:If heating equipment is composed of SCR IF power supply, induction heating ring, adjustable bracket of induction heating ring, cooling device, etc.【More】
-
3pe production line conveyor line product introduction
3pe transmission line: The screw conveyor is composed of a frame, a tire, a wheel pitch and wheel spiral angle adjustment mechanism, and a power system.【More】
-
What inspection items need to be done for 3PE anti-corrosion pipelines
3PE anti-corrosion pipelines3PE anti-corrosion is a kind of anti-corrosion outside the pipeline. 3PE anti-corrosion steel pipe has a high tightness. Long-term operation can greatly save energy, reduce costs and protect the environment. Every link in the anti-corrosion process should be tested according to standards.First: check oil, steel pipe pits, layers, weld shape and height defects on the sur【More】
-
Product introduction of vacuum sizing production line
The vacuum sizing die adopts the spiral structure, which is based on the company's experience in the process of trial production and the feedback from our old customers. The professional technicians of our company have made many improvements and abandoned many shortcomings of the former die structure, so that all kinds of new and old polyolefin plastics can be applied and reduced Small extrusion p【More】
-
Features of chipless cutting saw for vacuum sizing production line
The chipless cutting saw of the vacuum sizing production line is composed of a frame, a moving body, a rotary assembly, a clamping mechanism, a cutting tool device, and a PLC electric control system. During cutting, after the product is clamped by the clamping mechanism, the moving body moves backward on the rack rail under the action of traction. On the rotary assembly, the cutting blade is cut b【More】
